unmount
英 ['ʌnmaʊnt]
- 网络卸载；卸下；被解除
unmountunmount
卸载
有卸载(unmount)就应当先有挂载(mount) , 你应当先了解什么是挂载，自然就自然卸载了。分享到： 精彩知识在知道 。
卸下
未分类 - - Nicolas’ Blog - Upholstery ... unmirror 取消镜象 unmount 卸下 unnecessary a. 不必要的，多余的 ...
被解除
广播：扩展介质的挂载 被解除 (unmount)，因 String MEDIA_SHARED_ACTION 为它已经作为 USB 大容量存储被共享。 广播…
卸载映像档
卸载映像档（/unmount），将修改过的档案追加到原来的映像档中（/commit）。键入：copy x:＼winpe＼winpe.wim x:＼winpe…
卸载档案系统
卸载档案系统(unmount)或设定为唯读模式(read-only)如果档案可以正常存取时，请将ibdata1, ib_logfile0, ib_logfile1, 和所有的.f…
卸载虚拟硬盘
二、卸载虚拟硬盘(Unmount)： 选择虚拟硬盘里头的卸载，我的计算机里的虚拟硬盘则会消失。 三、设定及调整虚拟容量大小(…
取消挂载
三明智笔记本: 2010-04 ... mount 挂载 unmount 取消挂载 ...
1
The fact that you cannot unmount a file system in either of these cases is one of the basic rules of computer systems.
在这两种情况下，都无法卸载文件系统，这是计算机系统的基本规则之一。
2
That requires you to unmount the file systems that belong to the volume group you are going to export.
这需要卸载属于将要导出卷组的文件系统。
3
The standard Linux version of the umount command includes a lazy unmount option, -l, to help unmount file systems that are in use.
umount命令的标准Linux版本包含一个延迟卸载选项-l，它有助于卸载正在使用的文件系统。
4
On shutdown, heartbeat will first stop WebSphere MQ processes, then unmount the filesystem, and, finally, give up the IP address.
在关闭时，heartbeat将首先停止WebSphereMQ进程，然后卸载文件系统，最后释放IP地址。
5
This can be handy but is not exactly what you want to use when you need to unmount a file system now.
这很方便，但是当需要马上卸载文件系统时它并不合适。
6
When you're finished, simply unmount the unencrypted directory, as shown in Listing 12.
操作完之后，只需卸载未加密的目录，见清单12。
7
Figures reported include the time required to perform the unmount operation.
所报告的数字包括执行卸载操作所需的时间。
8
Unmount, unplug, and watch as the drive magically remounts on the tablet.
卸载、拔除然后观察，驱动器就能神奇地重新装载到tablet上。
9
Only root can mount or unmount the device but users can execute binaries and use the "sticky bit" (covered later).
只有root可以装载或者缷载设备，但是用户可以执行二进制文件和使用“stickybit”（稍后介绍）。
10
In extreme cases, you can unmount a volume to block access to it.
在某些极端情况下，可以卸载一个卷以禁止访问它。
11
If you get an error message "Could not unmount device, device is busy, " something is reading the filesystem.
如果您得到一个错误消息“Couldnotunmountdevice，deviceisbusy”，那么可能是文件系统正在被读取。
12
When these unfortunate situations occur, Linux doesn't have the opportunity to cleanly unmount the filesystem.
当出现这些不幸的情况时，Linux没有机会彻底卸载文件系统。
13
Unmount a blanket does not leave the remnants of difficult to clear.
卸下橡皮布不会留下难以清除的残胶。
14
Once you've done that, you can unmount this filesystem.
完成这个步骤后，可以卸载这个文件系统。
15
Unmount all mounted partitions on a device to get full access.
解除装置上所有分割区的装载以取得完整的存取权限。
16
When focused near it's closest regular focusing distance, the lens will be difficult to mount OR unmount.
当调焦到接近它的常规对焦距离的最近端时它将难以装卸。
17
If you need to unmount a file system now, and that file system reports that it is busy, you still have some options.
如果需要马上卸载文件系统，而文件系统报告忙碌，还有其他办法。
18
You have to close them or change their working directory before attempting to unmount the device again.
您需要关闭这些程序，或者更改其工作目录，然后再尝试卸载设备。
19
Some game can't install with mounted SD card, need to unmount it before installation.
有些游戏不能安装在SD卡，安装前需要卸载它。
20
The HADB1 node is now set up from a DB2 UDB perspective, and you unmount the filesystems and varyoffvg vgA and vgB.
现在，从DB2UDB的角度来设置HADB1节点，您要卸载文件系统并varyoffvgvgA和vgB。
21
Unmount the filesystem and fsck and re-mount it.
卸载文件系统，然后执行fsck命令并重新挂载它。
22
user specifies that a non-root user is permitted to mount and unmount the filesystem.
user指定一个非根用户被允许安装或卸载文件系统。
23
So the first task is to unmount the filesystem we wish to copy, so that we can access the logical volume.
第一个任务是卸载希望复制的文件系统，然后才能访问逻辑卷。
24
You can right-click the partition and select Unmount to unmount it.
您可以右键单击分区并选择Unmount卸载它。
25
To prevent this, you must always unmount a storage device before disconnecting it.
为避免这种情况，您一定要先卸载设备后再拔掉设备。
26
Once done, unmount the filesystem and varyoffvg hbvg.
完成之后，卸载文件系统并对hbvg执行varyoffvg。
27
For example, a user-space instance may not modify the kernel (load or remove kernel modules) nor mount or unmount file systems.
例如，一个用户空间实例也许不能修改内核（载入或移除内核模块），也不能挂载或卸载文件系统。
28
Do you want to empty the trash before you unmount?
卸载前是否要清空回收筒？
29
You can now unmount the floppy drive (as root) to get the disk out with
现在，你可以作为root用户使用下面的命令卸载软驱，以让磁盘处于空闲。
30
Once the copy process finishes and the Snapshot is no longer needed, simply unmount and scrap it using lvremove
复制过程完成之后，就不需要快照了，这时只需用lvremove卸载并销毁它