annealing
美 [ə'nilɪŋ]英 [ə'ni:lɪŋ]
- v.给…上釉；【冶】使韧化；〈比喻〉锻练(意志)
- 网络退火；退火处理；回火
过去分词：annealed 现在分词：annealing 第三人称单数：anneals
annealingannealing
退火
机械专业英语词汇（很全） - Lemon Tree ... air patenting 空气韧化 annealing 退火 anode effect 阳级效应 ...
退火处理
教育论坛 ... Analytical solution 分析解法 Annealing 退火处理 Annual covariance 年序列共变方 ...
回火
? 回火(Annealing) 接在离子植入法之后的过程 高温炉管加热让晶格重整 晶圆针测(CP) ? 晶圆测试：在完成晶圆制造程序后， …
球化退火
标准件定义及分类 ... 原材料： Raw material 球化退火： Annealing 冷拔： Drawing ...
低温退火
...高温变性（Denaturation），引物与模 板低温退火（Annealing）,引物在高温聚合酶的作用下延伸（Extention），在一定的条 …
高温退火
高温退火( annealing )通常会产生较完美的结晶构造，例如5c 在380 ℃加热10 分钟然后骤冷后的样品会显现较明显且较尖锐的 …
热退火
热退火（annealing） 157, 166, 205 热载子（Hot Carrier） 221, 242, 243 线状矽晶带法（String ribbon, SR） 77, 82 线锯切割 …
缓冷
石油英语词汇(A4) ... annealing oil 退火油 annealing 退火；缓冷；锻烧；韧化 annexation 附加；合并；附加物 ...
1
Simulated annealing tends to be trapped in local optima, but it also possess powerful fine adjustment ability.
模拟退火算法容易陷入局部最优解，但是具有很强的微调能力。
2
The CTE value of composites after solution and ageing treatment decrease obviously compared with that of annealing treatment.
复合材料固溶时效后的热膨胀系数与退火态相比明显降低。
3
One of the substrates is subject to hydrogen implantation and the two substrates are bonded to one another in an annealing process.
对其中一个衬底进行氢注入，并且所述两个衬底在退火处理中彼此结合。
4
The annealing temperature has significant effect on microhardness of AZ31, however, the time of annealing has no effect.
退火处理温度对AZ31镁合金的硬度值有显著影响，但退火处理时间的影响却不明显。
5
The thermal flutter speeds of the panel under yawed flow are obtained by means of a simulated annealing optimization algorithm.
利用模拟退火算法，对不同温度场下的偏航壁板颤振速度进行计算。
6
The formation of annealing twins was the result of migration of high angle boundary during the recovery.
退火孪晶形成于回复阶段，是大角度界面的迁移结果。
7
Chlorinated paraffin wax was painted uniformly on the surface of the softening annealing metal sheet with remaining heat for lubrication.
在有余热的软化退火板料上涂覆氯化石蜡润滑，使润滑剂均匀粘附在板料表面，润滑效果好。
8
Tea is made of holly leaf processing, so precisely, tea is not tea. But it has a good blood pressure lowering, annealing effect.
苦丁茶是由冬青树的叶子加工而成的，所以确切地说，苦丁茶不是茶。但是它具有良好的降血压，褪火等作用。
9
When applied solely to relieve stresses, it commonly is called stress-relief annealing, synonymous with stress relieving.
如果仅仅用于消除应力，就叫做去应力退火，与应力消除热处理是同义词。
10
A heuristic algorithm and a very fast simulated annealing algorithm were proposed to solve the single satellite scheduling problem.
基于对求解全局优化问题的确定性方法和模拟退火算法的分析，文中提出了一种改进的快速模拟退火算法。
11
And a special simulated annealing heuristics with two modules is developed as well.
针对问题的特点，开发了一种双模组模拟退火启发式算法；
12
These crystals had been deal with in a high temperature annealing, single- domain polarization and after redox treatment.
对生长出来的掺杂晶体进行了高温退火、单畴极化及氧化还原等后处理。
13
Thermal annealing process with a combination of hydrothermal annealing can improve wafers' optical properties quickly and efficiently.
将热退火过程与水热溶液退火进行了结合，能快速有效地提高晶片的光学性能。
14
A mask is patterned after high-temperature annealing to form a pedestal block on which a light emitting device is mounted.
在高温退火后对掩模进行构图以形成其上安装有发光器件的基座块。
15
And the higher the annealing temperature is, the better the optical homogeneity is in the temperature range of the experiments.
在实验温度范围内，退火温度越高，质量改善越明显。
16
The quality of hearth roll of continuous annealing furnace is one of major factors that affect work rates and surface quality of products.
硅钢连续退火炉的炉底辊质量是影响作业率和产品表面质量的主要因素之一。
17
The results indicated that the purity and crystallinity of the product could be improved as the annealing time prolonged.
结果表明，随着热处理时间的延长，不仅可以提高样品的纯度还可以增加样品的结晶性。
18
For samples to be given a simulated heat treatment the conditions for annealing, hardening and tempering shall be agreed.
因为样品要可以放置在模拟热处理的条件下，即退火，淬火和回火。
19
Furthermore the surface of bearing assembly shall be visible to the naked eye there is the burn (annealing traces).
再则轴承装配表面规定不得有肉眼可见的烧伤（退火痕迹）。
20
It transforms the source identification problem into the solution of an optimization problem using simulated annealing algorithm.
该方法把源项识别反问题转化为优化问题，用模拟退火算法求解。
21
of reducing annealing furnace and molten zinc alloy in the pot is to be controlled by two-level distribution control with computer.
采用二级微机集散控制系统控制还原退火炉的炉温和镀锅的镀液温度。
22
Quality and reliability analysis. AFM as well as the XRD results both demonstrate the good crystallinity of the thin-film after annealing.
质量方面，AFM表面形貌表征显示退火后的薄膜具有很好的结晶度，颗粒饱满、均匀。
23
Annealing also relieves internal stresses previously set up in the metal.
退火也释放了先前在金属中的内应力。
24
Adopted total Intermittently and automatically feed in, and sealed circle device can ensure each product the precise annealing time.
采用全自动间歇送进，封闭循环机构保证每件工件退火时间精确一致。
25
and putting the rough blank after annealing to a second steel die for forging pressing and shaping to obtain the suspension clamp.
将退火后的粗胚放入第二钢模锻压定型为悬垂线夹。
26
This paper summed up the tensile strength of steel wire, annealing temperature and annealing time by experimental datas of wire annealing.
利用钢丝退火试验数据，总结了钢丝的抗拉强度、退火温度和退火时间的关系。
27
Using simulated annealing method prevent the density of good schema increase greatly resulting in premature convergence.
采用模拟退火思想防止优良模式的浓度过快地增大引起早熟。
28
Excess fixed charge and surface states densities in various MIS structures have been successfully reduced by the RF annealing technique.
用这种退火技术可以明显地降低各种MIS结构中的固定电荷和界面陷阱。
29
In the process known AS annealing , we heat the steel above the critical temperature and permit it to cool very slowly.
在通常所说的退火的热处理过程中，我们把钢加热到临界温度以上，再让它慢慢冷却。
30
The result of calculating with practicing measure from aluminum annealing curve is consistent.
结果表明，铝卷退火曲线计算值与实测值结果比较吻合。