x-axis
美英
- n.横坐标轴
- 网络X轴；横轴；横轴上下限值
复数：x-axes
x-axisx-axis
X轴
"X"开头的英语单词!_百度知道 ... X-frame 交叉型框架 X-axis X 轴 Xenon 氙 ...
横坐标轴
国际贸易>风电词汇中英文对照表 ... wristwatch 手表 x-axis X 轴,横坐标轴 xerox 静电复印机 ...
横轴
横轴(x-axis)代表波长Wah! 写到: 就主序星的光度跟表面温度关系, 可从恒星的颜色推算它的绝对星等, 恒星距离我们越远, 视星 …
横轴上下限值
日立F... ... ＊X-Axis （横轴上下限值）－－－－－－时间轴， 根据需要设定. ＊Digit after decimal point （小数有效位）－－-可 …
坐标轴横轴
摘：美国军事术语大全 ... wounded in action 战斗负伤 X-axis X 轴，坐标轴横轴 yield 当量 ...
1
And that's what I proposed: that perhaps we could create these comics on an infinite canvas: along the X axis and the Y axis and staircases.
我的提议就是：也许我们能在一幅无限的画布上创作这些漫画：沿X轴，Y轴，以及阶梯递进。
2
The moment of inertia about the x-axis is going to be obtained by integrating y squared times the mass element.
对于x轴的转动惯量，就可以由对y^2*质量元做积分得到。
3
If you take this point here, it is going to go in a circle like that centered on the x-axis.
如果在这里取一个点，它会绕x轴上一点旋转。
4
Scale and position it roughly as shown in the previous figure. Have the bottom edge of the door lie roughly along the X-axis.
按照前面的图粗略的比例确定它的位置。让门的底边粗略地接近X轴线。
5
At home and abroad, there is not a CNC device about saddle groove processing which referred to X axis, Z axis and spindle rotating.
国内外还没有适合于X、Z和主轴旋转的三方面具备马鞍坡口加工的CNC装置。
6
So, as you do with the x-axis in the Cartesian plane, you consider a particular cell to be the origin.
因此，在笛卡尔平面使用x轴时，考虑一个特定的细胞为原点。
7
One of them involves computing a line integral from the origin to a point in the plane by going first along the x axis, then vertically.
一种是从原点开始，沿x轴水平前进，然后沿y轴竖直前进，求出相应的线积分。
8
It is possible to tilt the X-axis of the object as it moves through its path by adding the.
元素，可以使对象在沿着其路径移动的过程中使其X轴发生倾斜。
9
Charts typically have two axes used to categorize and measure the data: a category (x) axis and a value (y) axis.
图表通常有两个轴用于分类和度量数据：类别（X）轴和值（Y）轴。
10
The x-axis is usually the horizontal axis and contains the categories from the Category tab.
X轴通常为水平轴，包含“类别”选项卡中的类别。
11
But, if you think about it, y tells me how far I am from the x-axis, so how hard it will be to spin around the x-axis.
但仔细想想，y给出的其实是到x轴的距离，这就是绕x轴旋转的困难程度了。
12
You could easily plot these adventurous innovators on a graph, with the X axis showing their skill and the Y axis their financial means.
你可以把这些具有冒险精神的发明家们用一条曲线描述出来，X轴表示他们的技术能力，Y轴表示他们搞到的资金。
13
The x-axis is usually the horizontal axis and contains categories.
x轴通常为水平轴并包含分类。
14
So I can draw a diagram that looks just like this except now with the x-axis being the gas phase composition.
这样我就可以做一个，和这个相似的相图，唯一不同之处就在于x轴代表气体组分比。
15
alignment choice left The alignment of the label's content along the X axis, vertically is centered.
标签内容在X轴方向的对齐方式，竖直方向是居中的。
16
The MS spectrum graphically relates a protein's mass and charge (X-axis) to its abundance as measured by its signal intensity (Y-axis).
质谱图显示了某种蛋白质它的质量与电荷（X轴）与其通过信号强度检测所得的丰度（Y轴）之间的关系。
17
The function then evaluates the specified set against the second numeric expression, if specified, to get the set of values for the x-axis.
然后，此函数对指定的集计算第二个数值表达式（如果指定），以获得x轴的一组值。
18
By the way. Instead of going first along the x-axis vertically, you could do it the other way around.
顺便说下，如果不是先沿x轴再垂直走，你也可以换种方法走。
19
By default, time (the units on the X-axis) is shown in seconds.
默认情况下，时间（X轴上的单位）的显示单位为秒。
20
This work is then referenced and sequenced in a process along the x axis representing the timeline.
然后这些工作被引用并在过程中被排序，表现在时间轴x轴上。
21
Using the xtic option, this tells gnuplot to put the tic along the x axis along with the data labels (column one).
使用xtic选项让gnuplot沿着x轴放置tic和数据标签（第1列）。
22
The results show that the grinding wheel spindle has a great influence on the tooth error when it moves along X axis.
结果表明，砂轮主轴沿X轴运动对齿面误差影响较大。
23
The motion is only in the x-axis, along the x direction.
只在x轴，沿着x轴的方向进行移动。
24
Now, we notice that the x-axis is not really marked in degrees and does not look good.
现在，我们注意到x轴实际没有标记为度数，看起来不是很好。
25
Specifies the angle, in tenths of degrees, between the escapement vector and the x-axis of the device.
以十分之一度为单位，指定设备的行距向量和x轴之间的角度。
26
Next, let us give titles to the graph ( "My First Graph" ) and the axes (x-axis is "angle, in degrees, " and y-axis is "sin(angle)" ).
接着，将图命名为（“MyFirstGraph”），并命名轴（x轴是“angle，indegrees”，y轴是“sin（angle）”）。
27
If I'm on the x-axis, my vector field is actually in the y direction.
也就是，x轴上，向量场都是y方向的。
28
The X-axis is time, the left Y-axis is response time in seconds, and the right Y-axis is the number of user connections.
X轴是时间，左边的Y轴是响应时间，单位为秒，右边的Y轴是用户连接的数量。
29
The easiest of all, probably, is to just go first along the x-axis to and then go up parallel to the y-axis.
最简单的会是，首先沿x轴到，然后平行于y轴走。
30
Because the area is fixed, you can always find the span (length) of the X axis and the span (height) of the Y axis.
因为该区域是固定的，所以您总是可以找到X坐标轴的跨度（长度）和Y坐标轴的跨度（高度）。