vios
- 网络威驰；新威驰；丰田
viosvios
威驰
2002年10月8日，丰田在中国生产的第一辆轿 车威驰(VIOS)在天津丰田公司总装车间下线。 2003年10月8日，“陆地巡洋舰”在 …
新威驰
天津一汽丰田新威驰(Vios)谍照曝光 2007-10-26· 奔驰妖艳美女车模 · 自主品牌典型精锐车型阅兵 · 你都认识吗？
丰田
丰田 - TACA保证【昆定汽车】2008年 丰田(Vios)1.5L 仅跑1万7 黑内装 车行资料 同价位车辆 更多汽车精品百货 车型详解 更多 …
丰田牌威驰
43.《关于丰田牌威驰（VIOS）轿车减征消费税的通知》（财税[2003]279号） 44.《关于雅阁牌轿车减征消费税的通知》（财税[…
丰田威驰
作为丰田威驰（vios）的兄弟车型，雅力士（yaris）看着威驰(图库 论坛)、威姿(图库 论坛)（vizi）兄长们在广大的中国地区逍 …
老威驰
上海斯美特汽车用品有限公司 ... 08威驰/ VIOS 老威驰/ VIOS 雅力士/ YARIS ...
威驰车
特殊对应－威驰车(VIOS)零件编号的查询 四. 高级应用－“组”查询 三. 功能二零件编号适用车型的查询 第一章 第一章 概述 概述 …
1
Since you can only have one IVM in the JS22, you cannot use SEA failover as you can in a traditional VIOS installation.
由于在JS22中只能有一个IVM，所以不能像传统的VIOS安装中那样使用SEA故障转移。
2
This took a long time, as I had several disks (100+) assigned to my VIOS, and four paths to the SAN, all of which had to be scanned.
这花费了很长时间，因为我给这个VIOS分配了许多磁盘（超过100个），而且有四条到SAN的路径，这些都必须扫描。
3
The VIOS on both systems must be capable of providing virtual access to all storage resources that the mobile partition is using.
两个系统上的VIOS必须能够向迁移分区使用的所有存储资源提供虚拟访问。
4
All the disks that are visible on the AIX client partition have to be virtual disks (exported from VIOS using virtual SCSI).
在AIX客户机分区上可以看到的所有磁盘必须都是虚拟磁盘（使用虚拟SCSI从VIOS导出）。
5
With each of the GUIs, you can query the VIOS that holds the VM library to see what ISO images are available.
在这两个GUI中，都可以通过查询包含VM库的VIOS查看可以使用哪些ISO映像。
6
These steps were to check the general health of the VIOS.
这些步骤检查VIOS的健康状态。
7
I noticed several disks were identified as having AIX installed on them, but they did not belong to my VIOS rootvg!
我注意到，识别出了几个安装了AIX的磁盘，但是它们不属于我的VIOSrootvg！
8
Rather than mix two vendors' MPIO code on the same VIOS, it may be simpler to manage if each storage type has its own VIOS.
与在相同的VIOS混合两个供应商的MPIO代码相比，如果每种存储器具有其自己的VIOS将更容易管理。
9
The SAN disks that are exported to the AIX client partition must be available to both the VIOS partitions on both the CECs.
导出到AIX客户机分区的SAN磁盘必须在两个CEC上的两个VIOS上都可用。
10
Once both my VIOS were activated and I'd verified the virtual adapter mappings and health checks, I started an AIX LPAR.
在启动VIOS并检查虚拟适配器映射和健康状态之后，我启动一个AIXLPAR。
11
I also captured the location codes for the VIOS rootvg disks, which proved to be an important step, as shown later.
我还捕捉了VIOSrootvg磁盘的位置码，这是一个重要的步骤。
12
Therefore, logical memory has to be backed by both the physical memory in the pool and by the paging devices on the paging VIOS.
因此，逻辑内存必须由池中的物理内存和PagingVIOS上的分页设备共同支持。
13
Using the topas command on the source VIOS, you may observe some network traffic on the SEA (ent6) as a result of the memory copy.
在源VIOS上使用topas命令，可以看到SEA（ent6）上有一些网络通信流，这是内存复制产生的通信流。
14
However, many customers run two VIOS partitions to provide redundancy and fail-over to the AIX client partition.
但是，许多客户运行两个VIOS，以便为AIX客户机分区提供冗余和故障转移。
15
The VIOS partition profile is also updated to reflect the removal of these virtual devices.
VIOS分区概要文件也进行了更新以便反映这些虚拟设备的删除。
16
The supported devices differ between AIX and POWERVM VIOS, as well.
受支持设备在AIX和POWERVMVIOS中有所不同。
17
A switch of the paging VIOS partition can be initiated through the HMC command line using the chhwres command with the -so option.
可以在HMC命令行上使用带-so选项的chhwres命令切换分页VIOS分区。
18
The data LUNs had already been assigned to the VIOS and mapped and configured on the client LPAR.
这些数据LUN早已被分配给了VIOS并已在客户机LPAR上进行了映射和配置。
19
The IVM automatically created a VIOS paging device for each LPAR as part of the migration to shared memory.
在迁移到共享内存时，IVM自动地为每个LPAR创建一个VIOS分页设备。
20
If possible, the paging VIOS redundancy configuration for the migrated partition will be preserved on the target system.
如果可能的话，在目标系统上保持被迁移分区的分页VIOS冗余配置。
21
I also ensure that we update the VIOS and LPAR partition profile (on the HMC) with these newly created virtual adapters.
我还用这些新创建的虚拟适配器更新了VIOS和LPAR分区概要文件（在HMC上）。
22
AIXPCM supports all devices that the AIX operating system and VIOS POWERVM firmware support, including selected third-party devices.
AIXPCM支持AIX操作系统和VIOSPOWERVM固件支持的所有设备，包括选定的第三方设备。
23
NPIV with a VIOS, utilizes virtual FC devices to present disk (and tape) natively to the client LPARs.
具有VIOS的NPIV利用了虚拟的FC设备来将磁盘（和磁带）本机地呈现给客户机LPAR。
24
I activated one of the VIOS and waited while it started to boot.
我启动一个VIOS，等待它开始引导。
25
The VIOS on both systems must have a shared Ethernet adapter configured to bridge to the same Ethernet network used by the mobile partition.
两个系统上的VIOS都必须配置一个共享的Ethernet适配器，通过它桥接迁移分区使用的Ethernet网络。
26
If the shared memory partition has been configured to use redundant paging VIOS partitions, a common paging space device will be assigned.
如果共享内存分区使用冗余的分页VIOS分区，那么会分配共用的分页空间设备。
27
If 'no_reserve' is not set, then VIOS on the original CEC should be shut down before the switch over is done.
如果不设置‘no_reserve’，那么在执行切换之前原CEC上的VIOS应该关闭。
28
However, after an initial spurt, sales of the Vios have been weak.
然而，在经历最初的井喷之后，威驰的销售一直较为疲软。
29
You can confirm the existence of this device with the lsdev command on the VIOS.
可以在VIOS上使用lsdev命令检查是否存在此设备。
30
The paging VIOS partitions that you define here will be used as defaults when you later create the shared memory partitions.
在以后创建共享内存分区时，将默认使用这里定义的分页VIOS分区。